Electrician Scope of Work Generator
Stop losing money to scope creep. Create clear, professional scopes for panel upgrades, rewiring, EV chargers, and any electrical job—in under 60 seconds.
Electrical Scope of Work Examples
📋 200-Amp Panel Upgrade
Scope of Work:
- Remove and dispose of existing 100-amp electrical panel
- Furnish and install new 200-amp main breaker panel (Square D or equivalent)
- Install new 200-amp meter base as required by utility
- Re-terminate all existing branch circuits to new panel
- Install whole-house surge protector
- Label all circuits per NEC requirements
- Coordinate utility disconnect and reconnection
- Obtain permit and schedule inspections with local AHJ
Exclusions:
- Aluminum wiring remediation (quoted separately if discovered)
- Drywall patching or painting
- Running new circuits beyond panel capacity
- Repair of existing wiring deficiencies
📋 Level 2 EV Charger Installation
Scope of Work:
- Install customer-provided Level 2 EV charger (48-amp)
- Run new 6/3 NM-B cable from main panel to garage location (up to 50 ft)
- Install new 60-amp double-pole breaker in existing panel
- Mount NEMA 14-50 outlet or hardwire unit per manufacturer specs
- Test charging station for proper operation
- Obtain electrical permit and final inspection
Exclusions:
- EV charger unit (owner-furnished)
- Panel upgrade if insufficient capacity
- Trenching for underground runs
- Drywall or concrete penetration repair
📋 Kitchen Electrical Upgrade
Scope of Work:
- Install (2) new 20-amp small appliance circuits for countertop receptacles
- Install dedicated 20-amp circuit for dishwasher
- Install dedicated 50-amp circuit for electric range
- Install GFCI protection at all countertop and sink locations per NEC
- Install AFCI breakers for all new kitchen circuits
- Replace existing ungrounded outlets with grounded receptacles
- Install under-cabinet lighting on dedicated switch
Exclusions:
- Cabinet removal or reinstallation
- Drywall repair, patching, or painting
- Appliance hookup (range, dishwasher)
- Hidden junction box remediation
What to Include in an Electrical Scope of Work
✅ Always Include
- •Panel details: Amperage (100A/200A), brand, location
- •Circuit specs: Number of circuits, amperage, dedicated vs shared
- •Safety devices: GFCI locations, AFCI requirements, surge protection
- •Code compliance: NEC version, local amendments, permit requirements
- •Wire specs: Gauge, type (NM-B, MC, conduit)
- •Fixtures/devices: Exact count of outlets, switches, fixtures
⚠️ Common Exclusions
- •Drywall work: Patching, mudding, painting after wire runs
- •Aluminum wiring: Remediation if discovered during work
- •Hidden conditions: Buried junction boxes, knob-and-tube
- •Structural work: Moving walls, beams, or load-bearing elements
- •Other trades: Plumbing, HVAC, low-voltage/data
- •Code upgrades: Bringing entire house up to current code
💡 Pro Tips for Electrical Scopes
Be specific about wire runs:
Instead of "run new wire," say "run 12/2 NM-B from panel to garage, approximately 75 linear feet, surface-mounted in finished spaces."
Call out inspection responsibility:
Specify who schedules inspections and what happens if corrections are needed. "Contractor to obtain permit and schedule rough/final inspections."
Address panel space:
"If existing panel lacks space for new breakers, panel upgrade will be quoted as change order." This prevents surprise costs.
Document existing conditions:
Note any known issues upfront: "Existing panel is Federal Pacific—recommend replacement for safety (separate quote)."
Frequently Asked Questions
What should be included in an electrical scope of work?
A complete electrical scope should include: specific work to be performed (panel size, circuit count, device quantities), materials and equipment specifications, code compliance requirements (NEC, local codes), permit and inspection responsibilities, and clear exclusions. Always specify amperage, wire gauge, and safety device requirements (GFCI/AFCI locations).
How detailed should an electrician's scope of work be?
Detailed enough that another licensed electrician could complete the job from your description alone. Include specific quantities (not "some outlets" but "6 duplex receptacles"), locations, circuit assignments, and any conditions that would trigger a change order. The more specific you are upfront, the fewer disputes you'll have later.
Do I need a scope of work for small electrical jobs?
Yes—especially for small jobs. A quick outlet addition can turn into a panel upgrade if you discover aluminum wiring or a full panel. Even a simple scope that says "install one 20-amp GFCI outlet in garage; excludes panel upgrades, drywall repair, or hidden condition remediation" protects you from scope creep.
What's the difference between a scope of work and an estimate?
An estimate shows pricing. A scope of work defines exactly what's included (and excluded) for that price. The best practice is to attach your scope to every estimate. When a customer asks "can you also add an outlet in the bathroom?" you can point to the scope and say "that's not included, but I can add it for $X."
How do I handle unknown conditions in electrical work?
Always include a "concealed conditions" clause. Something like: "This scope is based on visible conditions only. Hidden defects including but not limited to aluminum wiring, buried junction boxes, damaged conductors, or code violations discovered during work will be documented and priced as a change order before proceeding." This protects you legally and sets customer expectations.